• My Account

Resources

Product Finder
Resource Type
825 Standard Indicator Firmware Full Update

NOTE: The

To download files: Click on the link above.

The information below shows update information organized into Update Packages. It is generally recommended that 825 indicators should be updated using the Update Packs instead of updating the individual components.

825 Software Version History

Update Pack 01.12.027 2021-10-21


Update Pack 01.12.026 2020-10-15

  • Loader - Updated DLC card configuration to allow manual DNS settings. Added ‘Advanced’ setup to set server and perform a ping to test network / iSite communications.
  • OS - Improved app DLC error messages. Updated standard apps.
  • MainBoard - General updates.

Update Pack 01.12.024 2020-01-23

  • Loader - Updated to allow for maximum sample rate 240 to be entered for new SWIM feature. Updated totalizer input screen for *AU* Australian mainboard version to allow for interval and decimal input for each scale included in the total.
  • OS - Updated to support new SWIM (slow speed weigh-in-motion) feature of mainboard buffering weight samples above the threshold. Remote control now allows for bitmap display (custom apps must be recompiled for remote control bitmap display).
  • MainBoard - Added feature for SWIM (slow speed weigh-in-motion) when enabled mainboard buffers weight samples above a specified threshold and sends in blocks to OPI board to allow greater throughput.

*****************************************************************************************************************************************************

Updating an 825 indicator

If you have an indicator that is out of date and you want to do a complete upgrade follow the instructions below.

Configuring a USB flash drive for 825 updating

  1. This is a zip file that contains all the files needed to upgrade your indicator (except for option card firmware) to the latest software. Insert a USB flash drive into one of the USB ports on the computer.

  2. Unzip the contents of the zip file to a USB flash drive. For example, if your flash drive is drive F: then you would unzip the contents of the zip file to the root directory of the F: drive. Right-click the zip file and select “Extract All…” Click “Next”. Click “Browse…” Select “My Computer” and then select the appropriate drive letter of your flash drive. Click “OK.” Click “Next”. Click “Finish”.

  3. After the files are unzipped you should have three files on your flash drive: “upd825.sh”, “loadsrec”, and “os825_xx_yy_zzz.825”. Click the system tray icon to “Safely Remove Hardware” and select the appropriate item to remove the USB flash drive.

    Performing a FULL Update

    WARNING: BACKUP ANY DATA FILES AND CUSTOM PROGRAMS YOU WISH TO KEEP!
    WARNING: Make sure reliable power is available before attempting the upgrade. A power interruption during the upgrade process could render the 825 inoperable and require returning the 825 to the factory for reprogramming!

    1. Make sure the 825 is powered off. Remove the four acorn nuts securing the bottom access cover and remove the cover to reveal the USB and network connections.

    2. Turn on the 825. Select “Application Mode”. Watch the display carefully. When the display shows “U = Update” press the “U” button on the 825 keypad. If “>>>>>>” is seen instead of “U = Update” the update prompt is disabled in the loader settings “Preferences” and “Startup Setup”. (If “U = Update” does not appear your indicator may have an older OS - refer to “Advanced Updating” then repeat this process after the OS is updated).

    3. The display may prompt for a login. If the login has not been changed use the default administrator login: “ADMIN” and “81440”.

    4. The display will show “Update from USB flash? (Y/N)”. Press “Y”.

    5. The display will show “Insert USB flash containing /upd825.sh - Press any key”. Insert the USB flash drive previously configured for 825 updating. Be careful to insert it in the correct orientation into either of the USB slots. After the USB flash drive is properly inserted press any key such as the “ENTER” key on the 825 keypad.

    6. The display will show “Mounting USB flash” and if successful will then show “UPDATE FLASH”, “Replace:” and show “Loader”, “OS”, and “Main Bd” with “Yes” or “No” shown to the right of each. If they are not all showing “Yes” the Up/Down? navigation keys may be used to highlight each item and press “Y” to change the selection to “Yes”. Press ENTER. The display will show “Checking file CRC…” When finished it will show “* DO NOT TURN OFF POWER DURING UPDATE *” and “Proceed (Y/N)?”. Press “Y” to proceed.

    7. The display will show counts as the update is performed. It may take 10 minutes or more. When finished the display will show “Done”. Remove the USB flash drive. Press a key and the 825 will reboot.

    8. The display will show “Restarting” briefly and then the 825 startup screen will appear. The “Loader:” “OS:” and “Mainboard” version displays should show the correct updated version numbers.

    9. If it is desired to clear the NAND storage memory use the “Configuration” selection from the “Application Menu”. Select “Set Factory Defaults”. Follow the on screen instructions. This will delete all program data and all custom application programs.