To download files: Click on the download link above.
Rev 3.1.14
• When selecting Livestock mode of operation, print settings that are not used (Tare, Net, and NAccum) are now cleared.
• Increased the maximum axle count to 25 for Axle Weigher mode of operation.
Rev 3.1.13
• For AU version only - Increased the maximum axle count to 25 for Axle Weigher mode of operation.
Rev 3.1.12
• Changed default byte order for 2XX-EIP option cards from 4321 to 1234.
Rev 3.1.11 Updates
• 212GX: Addressed issues communicating with installed option cards.
Rev 3.1.10 Updates
• Fixed issue with GEDGE output.
Rev 3.1.09 Updates
• Fixed rounding in livestock mode.
Rev 3.1.08 Updates
• Fixed issue that caused ID storage to print passes three times instead of once.
Rev 3.1.07 Updates
• Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).
• Ensure that additional talley commands are not processed while one talley command is pending due to motion.
• Fix bug that caused “Pass 1” or “Pass 2” to not display in certain conditionS when mode = ID STORAGE and LFT = YES.
Rev 3.1.06 Updates
• Fixed issues with net weighing on full-length scale in axle mode.
• Fixed alphabetic input from keyboard via USBA option card.
• Enable remote key functions on 210F.
• Fix lockup bug when mode = DFC, ID = YES, and user presses backspace with no text in ID entry screen.
Rev 3.1.05 Updates
• Fixed bug introduced in rev 3.1.04 that caused 12-hr time mode to not display am/pm.
Rev 3.1.04 Updates
• Fixed chechsum problem with the toledo long (8530) continuous output.
• Fix displaying of large negative weight after axle printed in axle weigher mode.
• USAB: Sped up read/write functions for the flash drive and SDcard.
• Show “FULL” when permanent ID memory is full.
Rev 3.1.03 Updates
• Allow OPER menu to be enter in serial scale mode.
• Fixed bug that sometimes prompts for ID twice in AXLE OPER menu.
• Added ability to delete visual tickets.
• Allow access to function keys even if scale is uncalibrated, this allows two important things to be viewed regardless of calibration:
1. A lamptest (which includes software version numbers)
2. SNAP cell mV readings
Rev 3.1.02 Updates
• Fixed bug that caused USBA option card to store duplicate transactions when using nControl ticket.
• Key input now displays an underscore instead of a blank screen when empty.
• Added support for setting PWC 5-8 weight values with PLC-related option cards.
• Livestock mode prompts for ID in setup.
• Axle weigher displays “PrntEd” in auto mode when printing.
• SNAP zero tolerance is handled by indicator.
• Allow 2XX-SNAP option card calibration to be duplicated and restored from mainboard.
• Change to not require deletion of calibration when SNAP C numbers are viewed but not changed.
Rev 3.1.01 Updates
• Set-up bugs fixed for SNAP-COM.
• Added nControl functionality through SNAP-COMs.
• Added the ability to receive and respond to SMA commands through multiple serial ports simultaneously (SNAP-COMs included).
• Disabled ASCII loopback to a remote indicator via SnapStream.
• SnapStream daisy-chained remote indicator support added.
• Fixed default printer port bug.
Rev 3.0.20 Updates
• Fixed prompting sequence in SST menu.
• Make Guardian hydraulic scale adjustments compatible with Dpp>0.
• Preliminary filter default to 0 when dflt=1 or 2.
Rev 3.0.19 Updates
• Fixed bug in USB transaction file when decimal point in used.
• Fixed problem with including data from previous transaction record in the current transaction record.
• Ensures that all outputs are OFF when entering SETUP.
Rev 3.0.18 Updates
• Add preliminary filter that does not break (filter setting “P=” is the number of samples to be integrated).
Rev 3.0.17 Updates
• Fixed problem with certain DFC ID’s being cleared before every edit.
• Modified routine for saving ID’s to be compatible with storage via USB-A option card.
Rev 3.0.16 Updates
• Increment the CCN when printing an nControl ticket in IDS mode of operation.
• Allow using remote inputs #5 and #2 to simulate an * PRINT keypad operation for the Axle Weigher and Livestock modes of operation.
Rev 3.0.15 Updates
• Update accumulators for DFC (speed=2, IDS=yes).
• Remove ‘ID:’ text when printing ID in nControl ticket.
• Confirm serial zeroing and retry up to four times if failed for Local/Remote configuration.
• Limit highfreqvalue to 99 (because MAX_SAMPLE_QUEUE is 100).
Rev 3.0.14 Updates
• Modified ETR record so that displayed weight (Gross or Net) is stored with mode indicator (USA=NO).
Rev 3.0.13 Updates
• SnapStream millivolt diagnostics bug fixed.
Rev 3.0.12 Updates
• Rev 3.0.11 caused a problem with auto ID in mode=IDS. Fixed the problem.
• Modified directory for data storage on USB drive for PC Companion.
Rev 3.0.11 Updates
• Fixed prompting sequence for dump gate and dump gate timer (mode=DFC).
• Added error message ‘iPFULL’ if the in process file is full (mode=IDS) maximum number of In-Process IDs is 25.
• SnapStream timeout routine modified and increased.
Rev 3.0.10 Updates
• Allows printing of ID for all modes of operation for an nControl ticket.
Rev 3.0.9 Updates
• SnapStream bug fix - the interval was getting set to 0.
Rev 3.0.8 Updates
• Added support for 2xx-USBA option card.
• Fixed problem displaying a blank ID in mode of operation 0.
• Added Scale ID in setup.
• Fixed problem with printing ID in nControl ticket for mode of operation 0.
• Fixed problem with prompting on 2xx-IP/RS232 option cards.
Rev 3.0.7 Updates
• SnapStream printing reliability improved (requires 2XX-SNAP Rev. 1.3.8).
Rev 3.0.6 Updates
• Manual mode axle-weigher bugs fixed.
• Livestock weigher interval rounding corrected.
• SnapStream filtering now handled by indicator (requires 2XX-SNAP Rev. 1.3.7).
Rev 3.0.5 Updates
• Added support for 2XX-ETR option card.
Rev 3.0.4 Updates
• Key lockout fixed.
• ASCII serial commands have been modified to suit new hardware and software.
Rev 3.0.3 Updates
• SMA commands related to continuous output updated for new com port configuration.
• Modified time-chip write/read test to correct “nochip” error.
• Added auto-axle weigher for both axle pads and truck scales.
• Software allows the 205 and 210 indicators to be compatible with Cardinal’s SnapStream wireless products.
Please Note: The SMT version of the 205/210 indicator no longer requires a unique hex file for use with Snapstream. All SnapStream functionality is included in the standard software starting at rev 3.0.0.
